Anchoring devices for crash barrier constructions

The purpose of crash barriers is to slow a vehicle down after a crash and correct its orientation. However, that can only be achieved as long as the end of the crash barrier does not come loose or curl up. That is why the crash barrier needs to be anchored extra firmly at the end.

The above-ground anchoring device consists of a frame with a steel rod attached to it which is connected to a concrete block by means of a threaded steel rod. That threaded rod can be tightened using a turnbuckle. This type of anchoring device is available in two design variations: with a 600 or 800 mm frame.

If the crash barrier rails at the end of a section curve downwards into the ground (24-metre end section), an underground anchoring device is used. Steel Constructions also supplies this underground anchoring device. The crash barrier can be firmly attached to the underground concrete blocks by means of a screw thread and turnbuckle.

Fast

When you need to install a crash barrier system, you can rely on Steel Constructions to be able to supply all the parts that you need. With our modern fully automated plant, we can supply above-ground and underground anchoring devices quickly from stock at a competitive price.